Товары бренда EVESKY

  USD 3

1. 90MM color light-emitting fan, color light effect and soft light fan blades, make your case and equipment more colorful.2. Cool LED light effect, 3PIN intelligent temperature control fan, large air volume and quiet, the fan adopts hydraulic bearings3. Horizontal fluid design, downward pressure direct blowing, easier to dissipate heat, lower center of gravity, protect the motherboard and save space in the case.4. The pure aluminum base is polished and polished, smooth and smooth, and seamlessly fits with the CPU for more reliable heat conduction5. Applicable to Intel/AMD dual platforms to meet CPU heat dissipation requirements6. Aluminum fins for better heat dissipation. And effectively use the wind force at the edge of the fan to improve the overall cooling performanceParameter:1. Radiator size: 115 x 115 x 58MM2. Heat sink material: Aluminum Fin3. Bearing type: hydraulic bearing4. Rated voltage: 12VDC5. Fan speed: 2000RPM(+/-10%)6. Fan life: 50000 (hours)7. Fan noise: 18dB8. Supported platforms:-For AMD FM1/FM2/AM2/AM2+/AM3+/AM4 AMD Am2 AM4&AMD3; S-754/939/940-For INTEL LGA IGA 775&Intel; 1200/1356/1366/1155/1156

  USD 5

1. The front panel is decorated with grids, precise craftsmanship, comfortable hand feeling and convenient heat dissipation2. Front I/O panel, convenient and quick3. Support M-ATX motherboard, multi-party hardware compatibility, meet most of the installation requirements on the market4. Double convex hull design on both sides to improve space, heat dissipation performance and back wiring5. 4PCI expansion card slots, graphics card length limit 270mm, CPU radiator height limit 155mm6. 5 hard drives positions, 3.5-inch HDD x 2, 2.5-inch SSD x 37. The front panel of the chassis can support a 120mm diameter cooling fan, the side panel supports a 120mm fan, and the back supports an 80mm fanParameter:1. Motherboard support: Micro-ATX, Mini-ITX2. Motherboard material: SPCC blackened3. Expansion slot: 44. Power supply: ATX power supply (upper)5. Fan position: front 1 x 12cm, rear 1 x 8cm, side 1 x 12cm6. Video card length limit: 270MM7. Radiator height limit: 155MM8. Hard disk space: HHD x 2, SSD x 39. Chassis size: 295mm(L)x165mm(W)x350mmReminder: The chassis are all empty, the pictures are renderings, excluding fans, hard drives, graphics cards, CPUs, etc.

  USD 17

1. 6 heavy protection design: overcurrent / overvoltage / undervoltage / over temperature / over power / short circuit2. Vortex fan blade fan frame cooling design, energy efficient, quiet and low noise3. High-density honeycomb cooling holes, better protection of internal components of the power supply4. 12V stable voltage, work more safely5. Support back alignment, a variety of interface configuration6. Galvanized double magnetic core filter, built-in dual capacitors, full copper transformerParameters:1. Type: ATX power supply2. Rated power: 500W3. Fan: 12 cm hydraulic fan4. PFC: non-active PFC5. Efficiency: 80%6. Input voltage: 220-240VAC7. Support wide range: support8. Support temperature control: Yes9. Main power supply interface: (20+4) P x 110. CPU 12V power supply interface: (P4+4) x 111. D-type 4PIN interface: 212. SATA interface: 313.6PIN+2 PCI-E interface: 114. Peak: 700W15. Power cord length: 1.5mFan parameters:1. Fan size: L120 x W120 x H25mm2. Bearing: hydraulic3. Rated current: 0.18Amp4. Cooling method: air-cooled5. Fan speed: 900-1700RPM +/- 10%6. Rated voltage: 12V

  USD 13

1. The panel opening design increases the air intake and guarantees heat dissipation2. The side of the acrylic is transparent, and the internal hardware can be seen at a glance, which is convenient for observation 3. The operation of the hardware, you can enjoy the gaming atmosphere brought by the light effect at any time4. Add bandage design to the panel, tough style, full of personality5. 6 large fan positions, all-round three-dimensional heat dissipation6. Multi-hard disk installation: 3.5-inch HDD hard disk x 2/2.5-inch SSD hard disk x 27. USB3.0 interface for fast data transmission8. The convex hull design increases the wiring space on the back and facilitates installation9. Reminder: The chassis are empty chassis, the pictures are renderings, without fansParameter:1. Chassis size: L332 x W185 x H413mm2. Material: 0.35 SPCC+acrylic side transparent3. Motherboard type: ATX/Micro ATX/ITX4. Hard disk support: HDD x 2+SSD x 25. Power supply position: independent compartment under the power supply6. CPU cooling height limit: 155MM7. Video card length limit: 300mm8. PCI-E card slot: 79. I/O interface: USB 2.0 x 2+USB3.0 x 1+HD Audio10. Cooling system:- Front support fan: 120mm x 3- Top support fan: 120mm x 2- Rear window support fan: 120mm x 1

  USD 10

1. The ATX power supply is installed on the top, and the temperature of the cabinet can be discharged directly through the power supply fan2. Front RGB light bar, cool atmosphere, one-button light control3. Support MICRO/ITX motherboard, support 160MM CPU radiator, graphics card up to 260MM4. The acrylic panoramic side is transparent, and the internal space can be seen at a glance5. The chassis shell uses a reinforced stamping shell to strongly support the hardware6. Multi-hard disk expansion: data storage can be installed with 2 HDD mechanical hard drives and 1 SSD solid state drive7. USB3.0 top I/O interface, convenient for data transmission8. 120mm fan position, independent cooling holes on the panelParameter:1. Material: SPCC2. Support graphics card (length): 260mm3. Support CPU radiator (height): 160mm4. Plate thickness: 0.5mm5. The motherboard is compatible with M-ATX/ITX6. Chassis size: L290 x W190 x H350mm7. I/O panel: USB2.0 x 1+USB3.0 x 1+Audio8. The number of supported hard disk expansion: 3.5-inch HDD x 2, 2.5-inch SSD x 19. Expansion card slot: 4 sets of expansion card slots10. Fan position: the front panel supports 120mm x 2, and the rear panel supports 120mm x 1Warm tip: The chassis are all empty chassis, the pictures are renderings, without fans, hard drives, etc.

  USD 20

1. Excellent motherboard compatibility, suitable for INTEL AMD2. The cold head has a built-in light source, colorful breathing light effect, and the light is soft and not good for eyes3. 9-blade design, full of wind power, anti-vibration pad design at the bottom, effective anti-vibration, tight fit.4. The high-density E-shaped arrangement increases the heat dissipation area, effectively removes heat, and improves the thermal cycle effect.5. Powerful water-cooled power system, water-cooled operation without noise, fast heat dissipation6. 12 RGB lamp beads, the color wheel scrolls cool and extraordinary.7. Sealed water pump, quieter and more reliable, still quiet after long-term use, the volume is less than 30dB.8. The pure copper base has a smooth finish and is finely polished to fit more closely with the processor.Parameter:120mm/240mm/360mm1. Rated voltage: 12V2. Radiator material: aluminum alloy3. Radiator size: 120mm: 153 x 120 x 27.5mm, 240mm: 276 x 120 x 27.5mm, 360mm: 397 x 120 x 27.5mm4. Fan size: 120 x 120 x 25MM5. Fan speed: 800-1800RPM (+/-10%)6. Fan air volume: 45.6 CFM (EACH)7. Fan life: greater than or equal to 40000HOURS, 25 degrees Celsius8. Fan control method: 4PIN PWM9. Water pump size: OD70 x 32MM10. Water pump noise: less than 26.9dBa11. Pump speed: 2600RPM (+/-10%)12. Pump working voltage: 4-12V13. Water pump power consumption: 1.92W (single row)14. Platform support:-For AMD SOCKET FM1, FM2, FM2+, AM2, AM2+, AM3, AM3+, AM4-For INTEL SOCKET LGA2011/2011-V3, 1366, 1150, 1151, 1155, 1156, 775